List of documents required for importing goods into the territory of the Customs Union Commodity nomenclature of foreign economic activity To assess customs duties and savings when importing goods into the territory of the Customs Union, it is very important to choose the correct code of the foreign trade code. In order for your cargo to pass customs, you need to make certificates and a declaration for your products. We have classified the necessary information for you:
- Extract from the register according to product classification
- Code Description
- Permit documents for import of cargo
- Required documents for export 8421392009
- Duty and VAT rate
Classification of goods by code 8421392009
| Description | Justification for the decision |
| The regeneration unit, used in the system for receiving, storing, dispensing and transporting oil and petroleum products, is designed to recover gasoline vapors and purify air from hydrocarbons. The installation is made in a compact housing, inside of which are mounted: a compressor, a motor, a cooler (heat exchanger, heat exchange medium - air), a fan assembly, a vacuum pump, a separator/membrane module, membrane switches, a pressure regulator, a hydrocarbon sensor, a drain valve, a block management. The installation is connected to a gas leveling pipeline connecting oil and petroleum product storage tanks, hermetic loading equipment for mobile tanks, ships and gas collectors. The operating principle of the installation: the excess volume of the steam-air mixture from the system enters the installation and is compressed (compressed and heated); the heated stream enters the heat exchanger, where it cools and partially condenses; the resulting mixture enters the “separator/membrane” module for separation into: a condensed product (gasoline), which is poured into a storage tank; permeate (supersaturated gasoline vapors), which is returned to the storage tank, and air, purified from hydrocarbons, which is released into the atmosphere. Installation dimensions (LxW, mm): 1283x546, weight: 165 kg. The unit is supplied assembled in a disposable wooden box together with a product passport, manufacturer’s certificate and operating instructions. | In accordance with OPI 1, 5(b) and 6, explanations for heading 8421 |
| Dust suction line with a volume of 35000 m3, the thickness of the main apparatus is made of 2.5 mm thick steel sheet depending on the size of the fan. Block dimensions 2300*4250*3500 mm, unloading system - PVC bags (10 pieces), operating temperature - constant 900 C warm temperature. | |
| System for removing waste from the lamella preparation site - the equipment is designed to purify the air when removing waste from the mineral wool preparation site. The waste is sucked up into the exhaust system directly from the mineral wool preparation area. The waste then passes through filters and, after shaking, ends up in a hopper. The waste is compacted using a rotating valve and falls into the waste bin. | |
| The low-pressure aspiration unit JKF SBF 140-4.0 A is designed to remove wood waste from machines, move it to a storage hopper and return warm air to the workshop. The aspiration unit can be used in the woodworking industry, in the production of animal feed, in the processing of metals and artificial materials. Capacity - 50,000 cubic meters. meters per hour. Motor power: 0.55 kW, rotation speed 20 rpm. Weight 4400 kg. Manufacturer: JKF Industri A/S Hadsund Denmark. | |
| The dust chamber is a dust filtration equipment using Dura-Life envelope-shaped filter bags. Operating principle: dust is deposited on the upper surface of the dust bag as air passes through the filter surface. An inflatable (injection) pipe intensively pumps compressed air into the bag filter. After this, the air flow changes its direction, inflating the bag filter and pushing out the dust. When removing the dust cake, it falls into a collection container, or the cake enters directly into the technological process. Mounted on a wire frame, the envelope-shaped bag filter ensures optimal air flow and thorough cleaning. Designed to provide continuous filtration of air from high concentrations of dust. | OPI 1 and 6 |
| Integrated air purification device (ACP) is a block unit designed for the preparation of cycle air of gas pumping units and gas turbine generator units. The installation includes: a snow retention device, a separation unit, fine cleaning units (left and right), an adapter with bypass valves, a hot air supply pipeline, a bellows shut-off valve and electrical equipment | |
| The air intake system consists of an intake filter compartment, an intake muffler and an air duct, walkways and support structures. | |
| Equipment for exhaust processing is designed to clean vapors from the surface of baths of acid galvanizing equipment from harmful impurities and release purified air into the atmosphere. The principle of operation of the equipment is filtration by passing vapors through a water curtain, in which heavy metals present in the vapors are precipitated by water. The equipment consists of air hoods, PVC pipelines, fans, pumps, cabling and wiring products, and electrical equipment. | |
| The TsOL brand dust separator is designed to clean dusty air coming from aspiration and pneumatic networks. The dust separator consists of a cylinder, an exhaust pipe cone, and a cap. The cylinder is an integral part of the dust separator. Dusty air enters the upper part of the cylinder through the inlet pipe and receives a helical movement along the cylindrical part of the dust separator. Under the influence of centrifugal force, dust particles are pressed against the walls of the cylinder and roll down into the dust separator cone. The dust collected in the cone is removed from the dust separator through the dust outlet, and the purified air is removed from the cyclone through the exhaust pipe. The cap is installed on the exhaust pipe flange and protects the dust separator from precipitation. | |
| Drying Monzun M1 is an adsorption dryer designed for drying the pressure air of oil-free compressors used to power dental units and devices in dental laboratories, as well as in the food industry. Dehumidification is carried out as follows: pressurized air from the compressor passes through a cooler with a fan and an adsorption chamber. Passing through the chamber, the air is dried and filtered in the outlet filter located in the upper part and is then directed through the humidity sensor chamber through a check valve to the receiver. | |
| The filter element for the vacuum pump is installed on the inlet pipes of the pump and is designed to filter the incoming air. Since the incoming air may contain mechanical debris that can damage the pump blades, the filter prevents the penetration of debris. The filter consists of a metal housing and a paper filter element through which the incoming air is filtered. |
HS codes: 8421392001 - 8421392009
8421392001
ADSORPTION DRYERS FOR CLEANING FROM CONDENSATE AND IMPURITIES OF COMPRESSED AIR, SINGLE-PHASE, VOLTAGE 230-240 V/50-60 Hz, POWER 50 W, MODEL “HDT60”, PRODUCED.
372 M3/HOUR-1 PC; PACKED IN WOODEN BOXES Having a problem? Call our customs specialist:
Moscow and region (call is free)
Saint Petersburg
8421392009
100-3511110-10 MOISTURE OIL SEPARATOR - AIR FILTER WITH AIR PRESSURE REGULATOR OF THE BRAKE SYSTEM GRUZ.AVT.URAL -35PCS.
8421392009
HEPA FILTER, HIGH ACTIVITY DUST AIR FILTER, RETAINS MORE THAN 99% OF ALL PARTICLES WITH SIZES FROM 0.3 µM AND GREATER, FOR AIR CLEANER
8421392009
NRR00000001680000 FILTER 1500 M3-1 PCS., FILTER FOR EXHAUST DEVICE-1 PCS. FOR AIR CLEANING IN EQUIPMENT FOR THE PRODUCTION OF PVC, METAL PROFILES
8421392009
FUEL VAPOR ABSORBER IN A PLASTIC CASE WITH COAL FILLING, WITH TWO PIPE - 1200 PCS, DESIGNED FOR THE PRODUCTION OF PASSENGER CARS OF THE RENAULT BRAND.
8421392009
AUTOMATIC DUST COLLECTION FILTER MOD. FKR 64/2.3/TR/SG, IS A STEEL SUPPORT WIRE BOX WITH A HOSE FILTER MADE OF NEEDLE-PUNCTED POLYESTER, USED FOR AIR CLEANING – 1 PCS.
8421392009
AUTONOMOUS AIR PURIFICATION SYSTEM “THERAPY AIR ION” WITH HEPA FILTER AND IONIZER (FILTERS SEQUENTIALLY ASSEMBLED IN A SINGLE BODY), HOUSEHOLD, LIGHT GRAY COLOR, OVERALL SIZE (WxHxH) 544X181X510 MM, VOLTAGE 22 0 V (60 Hz); ART.”PWC-570″- 80PCS
8421392009
ASPIRATION UNITS FOR AIR CLEANING FROM WOOD DUST AT WOOD PROCESSING ENTERPRISES, MODELS: MF9025 - 20PCS, MF9030 - 9PCS, MF9040 - 6PCS.
8421392009
BACTERIAL ELECTROSTATIC FILTERS, CASE MANUFACTURED. POLYPROPYLENE, HYDROPHOBIC MEMBRANE, USAGE DURATION 24 HOURS, DISPOSABLE, PREVENTS FROM BACTERIA AND VIRUSES BY 99.99%, USED IN INHALERS (NON-MILITARY PURPOSE)
8421392009
IN-CAB FILTER M2075 FOR NISSAN (WIDTH 201 MM, HEIGHT 30 MM, LENGTH 221 MM) ACCORDING TO COMPANY CATALOG No. 1 987 720 228/200606
8421392009
HOUSEHOLD, FLOOR AIR CLEANERS
8421392009
DRYER AIR FILTERS; ARTICLE: 432 410 020 2; CONDITION MADE OF METAL. CASE AND FILTER ELEMENT; PURPOSE: FOR PNEUMATIC BUS DRIVE; FUNCTIONAL WHO: NOT INSTALLED; FILTRATION CAPACITY: NOT INSTALLED — 10 PCS.
8421392009
AIR FILTERS, RECTANGULAR SHAPE, MADE OF ULTRA-THIN FIBER GLASS AND METAL MESH, USED FOR CLEANING COMPRESSED AIR AND SEPARATING CONDENSATE, (REMOVING PARTICLES UP TO 4 μM SIZE) IN CENTAC TYPE TURBOCHARGERS MODEL C170MX 2 , And
You can find additional information on the topic in the Unified Customs Tariff section. Section XVI.
Free consultation by phone:
Moscow and region (call is free)
Saint Petersburg
Attention! Due to recent changes in legislation, the legal information in this article may be out of date!
Our specialist will advise you free of charge.
Export documents 8421 39 200 9
| Permission | Required | Description |
| Duty | No | |
| Phytosanitary certificate | No | |
| Veterinary certificate | No | |
| Radiation Safety Certificate | No | |
| Licensing | ! may be required | The product does not require licensing, except for those included in the List of dual-use equipment and materials used for nuclear purposes and having the following characteristics: 2.2.2.3. Ion exchange systems specially designed for the separation of lithium isotopes, and components specially designed for them2.2.2.4. Chemical exchange systems (using crown ethers, lariat ethers or cryptands) specially designed for the separation of lithium isotopes, and components specially designed for them Order of the State Customs Committee of Russia No. 315 Appendix 5 dated 05/23/1996 |
| Quotas | No | The goods do not require licensing, except for goods included in the List of nuclear materials, equipment, special non-nuclear materials and having the following characteristics: 2.5.2.6.5. Uranium oxidation systems (chemical exchange). Specially designed or prepared systems for the oxidation of U(+3) to U(+4) for return to the uranium isotope separation cascade during chemical exchange2.5.2.7.6. Collectors of “product” or “tails” (laser enrichment methods). Specially designed or prepared components or devices for collecting uranium “product” and “tails” as a result of exposure to laser radiation Order of the State Customs Committee of Russia No. 402 of June 27, 1996 |
Import documents code 8421 39 200 9
| Permission | Required | Description |
| Quotas | No | |
| Quotas | No | |
| Preferential treatment | No | |
| Duty | No | Decision of the EEC Board No. 215 dated December 2, 2014 |
| Special duty | No | |
| Anti-dumping duty | No | |
| Countervailing duty | No | |
| Excise tax | No | |
| Deposit | No | |
| VAT | 20 % | Federal Law No. 117-FZ of July 7, 2003 |
| VAT | No | Decree of the Government of the Russian Federation No. 372 of April 30, 2009 * Equipment for aspiration systems for the production of oriented strand boards; equipment for maintaining microclimate and air purification in painting booths; installation of dust removal of the roasting machine; aspiration installation of a car loading station; aspiration unit for pellet transportation line Note: Technological equipment (including components and spare parts), analogues of which are not produced in the Russian Federation |
| Certificate of product compliance with national standards | ! may be required | Decree of the Government of the Russian Federation No. 1096 of October 24, 2014 * Ventilation filters (for purifying air from particles and volatile compounds in rooms and boxes of research laboratories) Note: Only consumables for scientific research, analogues of which are not produced in the Russian Federation * Filters and prefilters for laminar flow cabinets, animal cage replacement stations (G4 coarse filters and prefilters for filters. They are used for preliminary air purification and are installed on the air intake. The filters consist of a metal or plastic frame and polyester filter material, connected in the form of pockets, the opposite surfaces of the pockets are pulled together limiters, which prevents their strong swelling and sticking of adjacent pockets; when air passes through the filter, large particles (for example, pollen) are retained) Note: Only consumables for scientific research, analogues of which are not produced in the Russian Federation * Filters and prefilters for laminar cabinets, animal cage replacement stations (HEPA filter H14 and prefilter for the filter, purify the air from dust microparticles containing microorganisms, made of a sheet of fibrous material based on carbon, fiberglass or borosilicate, folded like an accordion, housing elements hold the sheet in the folded state, microparticles are held by fibers using mechanisms of engagement, inertia, diffusion) Note: Only consumables for scientific research, analogues of which are not produced in the Russian Federation * Filters and prefilters for laminar flow cabinets, animal cage replacement stations (fine air filters F7 and prefilters for filters . The filters consist of a metal or plastic frame and a filter material - polyester, connected in the form of pockets; the opposite surfaces of the pockets are tightened with limiters, which prevents them from swelling strongly and sticking together of adjacent pockets; they are intended for cleaning supply and recirculation air in ventilation systems and local clean zones; they are used as the second stage (fine cleaning according to GOST R 51251-99) of air purification after less efficient G4 filters) Note: Only consumables for scientific research, analogues of which are not produced in the Russian Federation |
| Certificate of product compliance with national standards | ! may be required | Decree of the Government of the Russian Federation No. 1042 of September 30, 2015 * Devices and apparatus for treatment, anesthesia. Devices for replacing the functions of organs and systems of the body 94 4400 (devices and devices for low-frequency electrotherapy; devices for high-frequency and quantum electrotherapy; devices and devices for exposure to ultraviolet and infrared rays; endoscopes for treatment; hydrotherapy and balneological, mechanotherapy devices; radiotherapeutic devices and devices , X-ray therapy and ultrasound; devices for inhalation anesthesia, pulmonary ventilation, aerosol therapy, compensation and treatment of oxygen deficiency; vacuum pressure devices, for infusion and irrigation; devices and devices for replacing the functions of organs and systems of the body; other devices and devices for treatment) * Means for control for ensuring comfortable living conditions for disabled people, which can only be used for the prevention of disability or rehabilitation of disabled people (including thermometers, barometers, air humidifiers, air purifiers, heaters, hot-air dryers, odor absorbers) * Special technical means for training disabled people and their labor activities that can only be used for the prevention of disability or rehabilitation of disabled people (including sewing and knitting machines adapted for disabled people, frames for weaving and knitting, tailor’s devices with enlarged numbers and raised divisions, ironing accessories, equipment for cleaning premises, devices for pottery, furrier and gardening work, stone and bone processing, chasing, music, painting, sports, hunting, fishing) |
| Certificate of product compliance with national standards | ! may be required | The product does not require a certificate, except for goods included in the List of Goods for which confirmation of their safety is required and having the following characteristics: * Filters for air purification * Explosion-proof electrical equipment and mining equipment * Electronic-physical functional devices, blocks and assemblies converting nuclear and radioisotope * Devices, blocks and units of electronic-physical functional information processing, nuclear and radioisotope * Devices, blocks and units of electronic-physical functional control and monitoring, nuclear and radioisotope * Devices, blocks and units of electronic-physical functional detection for converting nuclear information and radioisotope * Stands, technological installations for setting up nuclear and radioisotope equipment * Auxiliary equipment for nuclear power plants (drives, electric drives, pneumatic actuators, actuators and signaling devices for industrial and special pipeline fittings) * Radiation systems * Technological equipment (means of operational non-destructive testing systems) Resolution Government of the Russian Federation No. 982 dated December 1, 2009 |
| Declaration of product conformity with national standards | ! may be required | The product does not require a declaration of conformity, except for goods included in the List of goods subject to mandatory confirmation of conformity and having the following characteristics: * Specialized equipment and railway transport devices: mechanized stands, assembly and welding stands, welding conductors * Specialized equipment and railway transport devices: locking and sealing devicesResolution of the Government of the Russian Federation No. 982 of December 1, 2009 |
| Certificate of Conformity of the Customs Union | ! may be required | Products do not require conformity assessment within the Customs Union, except for goods included in the Unified List of Products Subject to Mandatory Conformity Assessment (Confirmation) and having the following characteristics: * Filter-type personal respiratory protection equipment (including self-rescuers), replacement elements for them . Replacement filters (filter elements) for personal protective equipment Note: Products subject to mandatory certification confirming compliance with the requirements of the technical regulations of the Customs Union “On the safety of personal protective equipment” Decision of the EEC Board No. 79 of 06/13/2012 |
| Certificate of state registration | No | * Vehicle components. Pneumatic brake drive devices: air preparation units (anti-freeze, moisture separators, pressure regulators); pneumatic drive protective equipment; condensate drain valves; control devices (brake valves, accelerator valves, trailer brake control valves, air distributors); braking adjustment devices (brake force regulators, pressure limiting valves in the pneumatic drive of the front axle); connecting heads; signaling and control devices (pneumoelectric sensors, control valves) Note: A certificate of compliance with the requirements of the CU technical regulations “On the safety of wheeled vehicles” (TR CU 018/2011) is presented. List of vehicles and their chassis that are not covered See the full text of the document Decision of the EEC Board No. 77 dated July 14, 2015 |
| Phytosanitary certificate | No | * for maintaining and adjusting the indoor microclimate: air purifiers, kitchen hoods (for domestic use) Note: A certificate of compliance with the requirements of TR CU “On the safety of low-voltage equipment” is presented. Applicable to electrical equipment intended for use at voltages from 50 to 1000 V AC and from 75 to 1500 V DC, ... See the text of the document Decision of the EEC Board No. 91 dated April 24, 2013 |
| Veterinary certificate | No | * Air purifiers, kitchen hoods (for maintaining and adjusting the microclimate in domestic premises) Note: A certificate of compliance with the requirements of the CU TR “Electromagnetic compatibility of technical equipment” is presented. The requirement does not apply to products if they relate to technical equipment that is passive in relation to electromagnetic compatibility, in accordance with Appendix 1 to TR. Decision of the EEC Board No. 2 dated January 16, 2014 |
| Licensing | ! may be required | * Filters for air purification Note: A certificate of the Russian Federation is presented * Chemical, oil and gas processing equipment Note: A declaration of conformity with the requirements of the technical regulations of the Customs Union “On the safety of machines and equipment” is presented * Cryogenic, compressor, refrigeration, autogenous, gas purification equipment: air separation and rare gas installations; equipment for the preparation and purification of gases and liquids, heat and mass transfer equipment for cryogenic systems and installations; compressors (air and gas driven); refrigeration units Note: A declaration of conformity with the requirements of the technical regulation of the CU "On the safety of machinery and equipment" is submitted * Gas cleaning and dust collection equipment Note: A declaration of conformity with the requirements of the technical regulation of the CU "On the safety of machinery and equipment" is submitted * Oilfield, drilling and geological exploration equipment Note: A declaration of conformity is submitted requirements of the technical regulation of the Customs Union "On the safety of machinery and equipment" * Equipment for the preparation and purification of drinking water Note: A declaration of conformity with the requirements of the technical regulation of the Customs Union "On the safety of machinery and equipment" is submitted * Technological equipment for the food, meat and dairy and fishing industries Note: A declaration of conformity is submitted requirements of the technical regulations of the Customs Union “On the safety of machinery and equipment” Decision of the Customs Union Commission No. 823 of October 18, 2011 |
| Certificate of product compliance with technical regulations | No | |
| Certificate of state registration | No | |
| Phytosanitary certificate | No | |
| Veterinary certificate | No | |
| Licensing | ! may be required | The goods do not require licensing, except for goods included in the List of nuclear materials, equipment, special non-nuclear materials and having the following characteristics: 2.5.2.6.5. Uranium oxidation systems (chemical exchange). Specially designed or prepared systems for the oxidation of U(+3) to U(+4) for return to the uranium isotope separation cascade during chemical exchange2.5.2.7.6. Collectors of “product” or “tails” (laser enrichment methods). Specially designed or prepared components or devices for collecting uranium “product” and “tails” as a result of exposure to laser radiation Order of the State Customs Committee of Russia No. 402 of June 27, 1996 |
| Quotas | No | |
| Classification decisions | Register of preliminary decisions on classification | |
| Quotas | No | |
| Classification decisions | Register of preliminary decisions on classification |
Still have questions?
You can find out more information about the HS code for foreign economic activity or what documents you need to import cargo by calling 8 (499) 350-14-21 (Irina) or by mail
Documents Statistics on documents and execution of orders
GOVERNMENT OF THE RUSSIAN FEDERATION
RESOLUTION
dated May 27, 2021 No. 796
MOSCOW
On introducing changes to the list of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to value added tax
The Government of the Russian Federation decides:
1. To approve the attached changes that are being made to the list of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to value added tax , approved by Decree of the Government of the Russian Federation of April 30, 2009 No. 372 “On approval of the list of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to taxation for added value" (Collected Legislation of the Russian Federation, 2009, No. 19, Art. 2330; No. 46, Art. 5487; No. 49, Art. 5963; 2010, No. 9, Art. 977; No. 11, Art. 1213; No. 16, Art. 1921; No. 30, Art. 4097; No. 41, Art. 5246; No. 52, Art. 7105; 2011, No. 12, Art. 1631; No. 18, Art. 2644; No. 25, Art. 3597; No. 28, Art. 4221; No. 36, Art. 5156; No. 40, art. 5551; 2012, No. 7, art. 883; No. 12, art. 1418; No. 17, art. 1970; No. 23, art. 3017; No. 26, art. 3514; No. 33, art. 4679, 4686; No. 46, art. 6352; 2013, No. 5, Art. 399; No. 14, art. 1706; No. 21, art. 2655; No. 36, art. 4597; No. 52, art. 7191; 2014, No. 18, Art. 2191; No. 26, art. 3572; No. 30, art. 4330; No. 46, art. 6357; No. 50, art. 7069; No. 51, art. 7453; 2015, No. 8, Art. 1173; No. 16, art. 2369; No. 26, art. 3907; No. 30, art. 4594; No. 37, art. 5145; No. 42, art. 5795; No. 47, art. 6606; No. 49, art. 6975; 2021, No. 10, Art. 1425; No. 17, art. 2414, 2416; No. 28, art. 4752; No. 35, art. 5345; No. 39, art. 5657; No. 46, art. 6471; 2021, No. 16, art. 2412; No. 27, art. 4051; No. 43, art. 6333; 2021, No. 4, art. 631; No. 12, art. 1689; No. 13, Art. 1823; No. 15, art. 2166; No. 17, art. 2496; No. 26, art. 3849; No. 41, art. 6242; 2021, No. 8, art. 794; No. 10, art. 969; 2020, No. 7, Art. 833; 2021, No. 1, art. 111; No. 17, art. 2961).
2. This resolution comes into force after one month from the date of its official publication.
Chairman of the Government of the Russian Federation M. Mishustin
APPROVED by Decree of the Government of the Russian Federation dated May 27, 2021 No. 796
CHANGES that are made to the list of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to value added tax
The list of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to value added tax, is stated as follows:
“APPROVED by Decree of the Government of the Russian Federation dated April 30, 2009 No. 372 (as amended by Decree of the Government of the Russian Federation dated May 27, 2021 No. 796)
LIST of technological equipment (including components and spare parts for it), analogues of which are not produced in the Russian Federation, the import of which into the territory of the Russian Federation is not subject to value added tax
HS CodeEAEU | Name of technologicalequipment |
8414 80 800 0 | Armed mattress compressor |
8419 40 000 9 | Equipment for a technological line for the production of benzene and derivatives; equipment for a technological line for the production of butadiene; equipment for oxygen station No. 2 |
8419 60 000 0 | Equipment for a plant for the production of liquefied natural gas at the South Tambey gas condensate field; liquefied natural gas plant equipment |
8419 89 989 0 | Equipment for a block-modular plant (plant) for the production of synthetic liquid fuel; equipment for a complex ammonia production plant; methanol production plant; equipment for the production of ammonia-urea-melamine based on purge gas from methanol production; equipment for a technological line for the production of ethylene and propylene |
8420 10 100 0 | Calenders or other roller machines used in the textile industry |
8420 10 800 0 | Coating machine RA 540-16m; technological line for the production of multilayer composite materials with a finishing coating up to 3400 mm wide, using a method of simultaneous direct application of a polyvinyl chloride or polyurethane composition on woven or non-woven bases in one pass |
8421 39 200 1 | Equipment and devices for filtering or purifying air with the collection of spinning waste |
8422 30 000 1 | Equipment for filling, capping, closing, sealing or labeling bottles, jars, boxes, bags or other containers, hermetically capping or capping bottles, jars, tubes and similar containers for the medical industry |
8422 40 000 1 | Packaging or wrapping equipment for the medical industry |
8423 20 000 0 | Scales for continuous weighing of products on conveyors |
8428 33 000 0 | Equipment of a specialized port conveyor complex for transshipment of bulk cargo (coal) |
8435 10 000 0 | Equipment for the production of wine, cider, fruit juice or similar drinks |
8439 20 000 9 | Line for the production of 5-layer corrugated cardboard, 2500 mm format, JETS300-2500-G-II |
8439 30 000 0 | Equipment for finishing paper or cardboard |
8440 10 100 0 | Folding machines |
8440 10 300 0 | Sewing machines, wire sewing machines and wire staplers |
8441 30 000 0 | Machines for making cardboard boxes, crates, tubes, drums or similar containers by processes other than molding |
8443 13 390 0 | Eight-color sheet-fed offset printing machine with a varnishing section and a device for turning the sheet in line (format 75x106 cm) HEIDELBERG SPEEDMASTER XL 106-8-P+L |
8443 19 200 1 | Machines for printing on textile materials with cylindrical mesh stencils |
8443 32 100 2 | Printers that can be connected to a computer or to a network for printing on textile materials - inkjet printers |
8443 32 100 9 | Arojet SPT X1 printer is a modular device for digital inkjet printing of variable data; Arojet SPT X6 printer - modular device digital inkjet printing of variable data; Arojet SPT X9 printer - modular device digital inkjet printing of variable data; modular digital inkjet printer variable data Aroja Xorfex PU series, model 70-1СLUV-3PH |
8443 39 900 1 | Machines for printing on textile materials, digital inkjet printing machine model “ReNOIR 180/16/16” |
8444 00 100 0 | Chemical Textile Extrusion Machines |
8445 11 000 0 | Carding machines for preparing textile fibers |
8445 13 000 1 | Roving machines for preparing textile fibers |
8445 13 000 2 | Draw machines with linear sliver density regulators for the preparation of textile fibers |
8445 19 000 1 | Textile fiber preparation machines - fiber cleaners |
8445 19 000 2 | Textile fiber preparation machines - multi-chamber mixing machines |
8445 19 000 9 | Automatic bale openers, feeder-rippers, oiling machines |
8445 20 000 1 | Ring spinning textile machines |
8445 20 000 9 | Pneumatic spinning machines, rotary spinning machines, self-twisting spinning machines |
8445 30 000 0 | Cane textile machines; double twist textile machines; ring twisting machines |
8445 40 000 1 | Winding machines with automatic yarn quality control and automatic elimination of yarn defects |
8445 40 000 9 | Winding machines |
8445 90 000 1 | Belt warping machines |
8445 90 000 9 | Batch warping, sizing, parting, knotting machines |
8446 10 000 08446 21 000 08446 30 000 0 | Weaving machines |
8447 11 000 1 | Circular knitting machines |
8447 12 000 9 | Circular knitting machines with a cylinder diameter of more than 165 mm |
8447 20 200 0 | Warp knitting machines (including Rachelle machines); knitting and stitching machines |
8447 20 800 0 | Flat knitting machines |
8448 11 000 0 | Dodgy lifting carriages and jacquard machines, mechanisms for reducing the number of cards, copying, card cutting or potato stitching machines for use in conjunction with machines of heading 8444, 8445, 8446 or 8447 of the EAEU Commodity Classification for Foreign Economic Activity |
8449 00 000 0 | Equipment for the production or finishing of felt or felt or non-woven materials, in pieces or cut, including equipment for the production of felt hats; hats for making hats |
8451 29 000 0 | Textile stabilization stretching and drying machine RED evo7/DUALFLOW/5 K/200; drying-treading machines models 180/8, 180/10, Montex 5000 |
8451 40 000 2 | Yarn Dyeing Machines |
8451 40 000 9 | Batch dyeing machines models Eco-soft plus-F 140/1 Thies PL, Eco-soft plus-F 140/2 Thies PL, Mini-soft Thies PL |
8451 50 000 0 | Inspection vehicles; fabric slitting machine ZC |
8451 80 100 0 | Machines used in the manufacture of linoleum or other floor coverings for applying paste to woven or other backing |
8451 80 300 9 | Textile steaming machine UNIVAPOR 1K/150/200; Biancalani softening and drying machine Airo 24E |
8451 80 800 1 | Gas-burning machines for processing fabrics with a working width of at least 180 cm |
8452 21 000 0 | Automatic sewing machines |
8453 10 000 0 | Equipment for preparing, tanning or processing hides or skins |
8453 20 000 0 | Equipment for making or repairing shoes |
8455 10 000 0 | Pipe rolling mills |
8455 21 000 9 | Rolling mill for the production of rails, beams and profiles; hot rolling line equipment |
8455 22 000 8 | Single-stand 6-roller reversing cold rolling mill RZ-ZJ-2019-01 |
8456 11 000 0 | INNOLAS IL 1000 plate marking system |
8465 94 000 0 | Equipment for a pressing line for the production of laminated chipboard with high-speed synchronous loading and unloading systems “SYNCHRON-QUICK-SS”; equipment for lamination line for chipboard panels |
8474 20 000 8 | Salt pick-up Dart SH1000 |
8475 29 000 0 | Sectional glass molding machines type AL |
8477 10 000 18477 10 000 9 | Injection molding machines |
8477 20 000 0 | Extrusion line for coating GT-120mm+120mm |
8477 40 000 0 | Vacuum casting machines and other thermoforming machines |
8477 59 800 0 | Automatic vacuum forming line SuperLine NG PF2 |
8479 30 100 9 | Equipment for the production of chipboards with a continuous pressing system “ContiRoll(R)” |
8479 81 000 0 | Hot galvanizing line RZ-DX-2018-10; etching line RZ-SX-2019-02; extrusion line for applying insulation GT-120mm+45mm |
8479 82 000 0 | Technological line for the production of sterile infusion solutions and parenteral nutrition solutions |
8479 89 970 8 | Equipment for a complex plant for the production of urea |
8486 10 000 9 | Single-sided chemical-mechanical polishing machine BSC-50A |
8486 20 900 3 | Installations for removing photoresist or cleaning semiconductor wafers |
8486 20 900 9 | Installation for epitaxial deposition of silicon layers, model PE3061D |
8514 10 800 0 | High temperature sapphire annealing furnace PCST-1850FLED-G2 |
8701 95 900 0 | Traction unit of the Dart 5225C salt moving machine |
8716 39 300 1 | Dart 5225C salt moving machine body |
8716 90 900 0 | Towbar of the Dart 5225C salt moving machine |
9031 49 900 0 | Installation for non-contact measurement of geometric parameters MICROPROF 200 MHU |
Note. For the purposes of applying the list, it is necessary to be guided by the EAEU HS code and the name of the technological equipment.”
____________
Extended Description 8421
8421 Centrifuges, including centrifugal dryers;
equipment and devices for filtering or purifying liquids or gases: - centrifuges, including centrifugal dryers: 842111 - milk separators 8421 12 - clothes dryers 8421 19 - other - equipment and devices for filtering or purifying liquids: 8421 21 - for filtering or purifying water 8421 22 - for filtering or purifying drinks other than water 8421 23 - for filtering oil or fuel in internal combustion engines 8421 29 - other - equipment and devices for filtering or purifying gases: 8421 31 - air filters for internal combustion engines 8421 39 - other - parts: 8421 91 - centrifuges, including centrifugal dryers 842199 - other This heading includes:
(I) Machines that use centrifugal force to completely or partially separate substances by force...
- Read more
